Sustained oxidation of Tea-Fe(III)/H2O2 simultaneously achieves sludge reduction and carbamazepine removal: The crucial role of EPS regulation.

Establishing an economic and sustained Fenton oxidation system to enhance sludge dewaterability and carbamazepine (CBZ) removal rate is a crucial path to simultaneously achieve sludge reduction and harmless. Leveraging the principles akin to "tea making", we harnessed tea waste to continually release tea polyphenols (TP), thus effectively maintaining high level of oxidation efficiency through the sustained Fenton reaction. The results illustrated that the incorporation of tea waste yielded more favorable outcomes in terms of water content reduction and CBZ removal compared to direct TP addition within the Fe(III)/hydrogen peroxide (H2O2) system. Concomitantly, this process mainly generated hydroxyl radical (•OH) via three oxidation pathways, effectively altering the properties of extracellular polymeric substances (EPS) and promoting the degradation of CBZ from the sludge mixture. The interval addition of Fe(III) and H2O2 heightened extracellular oxidation efficacy, promoting the desorption and removal of CBZ. The degradation of EPS prompted the transformation of bound water to free water, while the formation of larger channels drove the discharge of water. This work achieved the concept of treating waste with waste through using tea waste to treat sludge, meanwhile, can provide ideas for subsequent sludge harmless disposal.

[Development of a carbamazepine determination method based on high-performance liquid chromatography with diode array]. / Razrabotka metodiki opredeleniya karbamazepina na osnove vysokoeffektivnoi zhidkostnoi khromatografii s diodno-matrichnym detektirovaniem.

Carbamazepine is used in the treatment of convulsive disorders, trigeminal neuralgia and mental illnesses such as bipolar disorder and pain syndromes. It has been found in clinical applications that carbamazepine causes many serious adverse drug reactions, which are associated with drug concentration in blood and dosage in clinical use. Due to its pharmacological properties, carbamazepine can be life-threatening in an overdosage, making the therapeutic drug control of carbamazepine important in any clinical settings. Creation of a method for carbamazepine quantification in biological objects during forensic chemical examinations is an urgent problem. A method of high-performance liquid chromatography with diode array detection is proposed for carbamazepine quantitation. The stability of proposed conditions for carbamazepine analysis has been proved in the modifying study conditions (flow rate of eluent, its composition, pH of buffer, column oven temperature). The relative standard deviation of retention time and areas of chromatographic peaks of carbamazepine did not exceed 0.5%.

Degradation and transformation of carbamazepine in aqueous medium under non-thermal plasma oxidation process.

Carbamazepine (CBZ) is a pharmaceutical compound detected in various water resources. With a view to removing this contaminant, the applicability of non-thermal plasma (NTP) oxidation process has been widely tested in recent years. This study utilized NTP from a dielectric barrier discharge reactor in the treatment of CBZ. NTP on the surface of a water sample containing 25 mg.L-1 of CBZ resulted in a removal efficiency of over 90% with an energy yield of 0.19 g. (kWh)-1. On the other hand, a rapid reduction in pH and an increase of conductivity and nitrate/nitrite ions concentration were observed during the degradation. The applied voltage amplitude significantly affected the removal efficiency and the energy yield as the degradation efficiency was 55%, 70%, and 72% respectively with an applied voltage of 8, 10, and 12 kV. The water matrices containing inorganic anions such as chloride and carbonate ions reduced the removal efficiency by scavenging the reactive species. Accordingly, a reduction in the removal efficiency was observed in tap water. The high-resolution mass spectrometry (HRMS) results revealed that both reactive oxygen and nitrogen species take part in the reaction process which yields many intermediate products including aromatic nitro-products. This study concluded that NTP can effectively degrade CBZ in both pure and tap water, but special attention must be paid to changes in the water quality parameters (pH, conductivity, and nitrate/nitrite ions) and the fate of nitro products.

Molecular insights into the formation of drug-polymer inclusion complex.

Drug-polymer inclusion complex (IC) has been viewed as a novel solid form of drugs for property modification. Nonetheless, our understanding of the formation mechanism remains limited. This work aims to provide insight into the molecular processes governing the structural construction of carbamazepine (CBZ) and griseofulvin (GSF) channel-type ICs in the presence of guest polymers. Leveraging microdroplet melt crystallization, we successfully unveiled the single-crystal structures of these ICs, enabling structural analysis, density functional theory calculations, and molecular dynamics simulations. The results collectively elucidate the disparity between CBZ and GSF channels in terms of their autonomy in the absence of guest polymers. CBZ molecules can spontaneously assemble into stable channel structures independently, capitalizing on their unique mortise-tenon architecture and robust π…π interactions. Conversely, GSF channels lack sufficient support from weak Cl…O and C-H…π intermolecular interactions and necessitate the insertion of guest molecules to stabilize their structures. We further calculated the eleven structurally determined drug-polymer ICs and found that their channel sizes consistently fall within a narrow range of 3.81-5.18 Å although they adopt diverse approaches to construct channel structures. We anticipate that these findings will inspire continued exploration of this novel solid form, facilitating theoretical predictions and practical applications in pharmaceutical development.

Mechanistic investigation of the electricity and gallic acid synergistically accelerated Fe(III)/Fe(II) cycle for the degradation of carbamazepine.

This study investigated the application of a natural plant polyphenol, gallic acid (GA) to form complex with iron to promote the redox cycle of Fe(III)/Fe(II) under neutral initial pH conditions in the electrochemical (EC) system for activation of peroxymonosulfate (PMS) to efficiently degrade carbamazepine (CBZ). Results demonstrated that the synergistic effects of GA and EC significantly improved the removal efficiency, and the EC/GA/Fe(III)/PMS system effectively removed 100% of CBZ within a wide initial pH range of 3.0-7.0. The optimum stoichiometric ratio of GA to Fe(III) was found as 2:1. Investigations including quenching experiment, chemical probe analysis, and electron paramagnetic resonance (EPR) analysis were conducted to identify the primary reaction radicals as •OH, SO4•-, along with the 1O2 and Fe(IV). In the EC/GA/Fe(III)/PMS system, the synergistic effect of GA and electrochemistry led to a remarkable enhancement in the generation of •OH. Furthermore, the complexation reduction mechanism of GA and Fe(III) was proposed based on experimental and instrumental analyses, which demonstrated that the semi-quinone products of GA were the main substances promoting the Fe(III)/Fe(II) cycle. Mass spectrometry results showed that CBZ generated 27 byproducts during degradation, with formic acid as the main product of GA. The degradation efficiency of the EC/GA/Fe(III)/PMS system remained stable and excellent, exhibiting remarkable performance in the presence of various inorganic anions, including Cl- and NO3-, as well as naturally occurring organic compounds such as fulvic acid (FA). Overall results indicated that the EC/GA/Fe(III)/PMS system can be applied to effectively treat practical wastewater treatment without requirement of pH adjustment.

Simple HPLC-UV Method for Therapeutic Drug Monitoring of 12 Antiepileptic Drugs and Their Main Metabolites in Human Plasma.

The objective of the present report was to develop and validate a simple, selective, and reproducible high-performance liquid chromatography method with UV detection suitable for routine therapeutic drug monitoring of the most commonly used antiepileptic drugs and some of their metabolites. Simple precipitation of plasma proteins with acetonitrile was used for sample preparation. 10,11-dihydrocarbamazepine was used as an internal standard. Chromatographic separation of the analytes was achieved by gradient elution on a Phenyl-Hexyl column at 40 °C, using methanol and potassium phosphate buffer (25 mM; pH 5.1) as a mobile phase. The method was validated according to the FDA guidelines for bioanalytical method validation. It showed to be selective, accurate, precise, and linear over the concentration ranges of 1-50 mg/L for phenobarbital, phenytoin, levetiracetam, rufinamide, zonisamide, and lacosamide; 0.5-50 mg/L for lamotrigine, primidone, carbamazepine and 10-monohydroxycarbazepine; 0.2-10 mg/L for carbamazepine metabolites: 10,11-trans-dihydroxy-10,11-dihydrocarbamazepine and carbamazepine-10,11-epoxide; 0.1-10 mg/L for oxcarbazepine; 2-100 mg/L for felbamate and 3-150 mg/L for ethosuximide. The suitability of the validated method for routine therapeutic drug monitoring was confirmed by quantification of the analytes in plasma samples from patients with epilepsy on combination antiepileptic therapy.

Degradation of carbamazepine in surface water: performance of Pd-modified TiO2 and Ce-modified ZnO as photocatalysts.

Carbamazepine is a widely used antiepileptic drug to control and treat a variety of disorders that is frequently detected in surface water, and in municipal and urban wastewater. This recalcitrant pollutant could be removed by alternative advanced oxidation technology such as heterogeneous photocatalysis. Ce-modified ZnO and Pd-modified TiO2 were synthesized by a microwave-assisted sol-gel method. According to the characterizations (Raman spectroscopy, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy), a mixture of oxides was determined in both materials: CeO2/ZnO and PdO/TiO2. Photocatalytic degradation of carbamazepine in pure water under visible light (3 h) was assayed. The degradation percentage obtained with each catalyst was 80%, 53%, 20%, and 9% for ZnO, Ce-modified ZnO, TiO2, and Pd-modified TiO2, respectively. The leaching of Zn as a possible source of water contamination was tested, finding the lowest value for Ce-modified ZnO by adjusting the initial pH up to neutrality. Later, an environmentally relevant concentration of carbamazepine (228 µg L-1) was assayed, using local surface water (pH = 8.3). Despite the presence of other compounds in the real water matrix, after 5 h of photocatalysis, a 56% of degradation of the pharmaceutical and low leaching of Zn were achieved. The use of Ce-modified ZnO activated by visible light is a promising strategy for the abatement of pharmaceutical active compounds.

An In Vitro Model for Cocrystal Dissolution with Simultaneous Surface and Bulk Precipitation.

Cocrystals can be promising means of overcoming the poor aqueous solubility of many drugs. However, precipitation of the stable drug at the cocrystal surface or in the bulk medium is often provoked during cocrystal dissolution due to high drug supersaturation, which prevents sustaining high drug concentrations for enhanced bioavailability. There is a need for predictive in vitro models that can accurately describe this cocrystal dissolution-supersaturation-precipitation (DSP) process to aid drug development and formulation design. Consideration of surface precipitation is often essential for such models given the strong impact of surface precipitation on the drug concentration during cocrystal dissolution. However, DSP models that can explicitly account for the effect of surface precipitation are currently lacking. This work presents a population balance-based model to describe in vitro cocrystal DSP behavior, which accounts for cocrystal dissolution, surface precipitation, and bulk precipitation. Dissolution experiments with carbamazepine-succinic acid cocrystals are conducted for model development and validation. The developed model captures all of the principal experimental trends and predicts the dose-dependent DSP behavior outside the regression data set with reasonable accuracy. The results show that surface precipitation is an essential component of the model. Finally, the new model is integrated with numerical optimization to illustrate how it can be used to identify an optimal dose, particle size, and amount of predissolved coformer.

New cocrystals of heterocyclic drugs: structural, antileishmanial, larvicidal and urease inhibition studies.

Many heterocycles have been developed as drugs due to their capacity to interact productively with biological systems. The present study aimed to synthesize cocrystals of the heterocyclic antitubercular agent pyrazinamide (PYZ, 1, BCS III) and the commercially available anticonvulsant drug carbamazepine (CBZ, 2, BCS class II) to study the effect of cocrystallization on the stability and biological activities of these drugs. Two new cocrystals, namely, pyrazinamide-homophthalic acid (1/1) (PYZ:HMA, 3) and carbamazepine-5-chlorosalicylic acid (1/1) (CBZ:5-SA, 4), were synthesized. The single-crystal X-ray diffraction-based structure of carbamazepine-trans-cinnamic acid (1/1) (CBZ:TCA, 5) was also studied for the first time, along with the known cocrystal carbamazepine-nicotinamide (1/1) (CBZ:NA, 6). From a combination drug perspective, these are interesting pharmaceutical cocrystals to overcome the known side effects of PYZ (1) therapy, and the poor biopharmaceutical properties of CBZ (2). The purity and homogeneity of all the synthesized cocrystals were confirmed by single-crystal X-ray diffraction, powder X-ray diffraction and FT-IR analysis, followed by thermal stability studies based on differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Detailed intermolecular interactions and the role of hydrogen bonding towards crystal stability were evaluated quantitatively via Hirshfeld surface analysis. The solubility of CBZ at pH 6.8 and 7.4 in 0.1 N HCl and H2O were compared with the values of cocrystal CBZ:5-SA (4). The solubility of CBZ:5-SA was found to be significantly improved at pH 6.8 and 7.4 in H2O. All the synthesized cocrystals 3-6 exhibited a potent urease inhibition (IC50 values range from 17.32 ±â€…0.89 to 12.3 ±â€…0.8 µM), several times more potent than standard acetohydroxamic acid (IC50 = 20.34 ±â€…0.43 µM). PYZ:HMA (3) also exhibited potent larvicidal activity against Aedes aegypti. Among the synthesized cocrystals, PYZ:HMA (3) and CBZ:TCA (5) were found to possess antileishmanial activity against the miltefosine-induced resistant strain of Leishmania major, with IC50 values of 111.98 ±â€…0.99 and 111.90 ±â€…1.44 µM, respectively, in comparison with miltefosine (IC50 = 169.55 ±â€…0.20 µM).

Drug Phase Transformation and Water Redistribution during Continuous Tablet Manufacturing: A Case Study of Carbamazepine Dihydrate.

In recent years, continuous tablet manufacturing technology has been used to obtain regulatory approval of several new drug products. While a significant fraction of active pharmaceutical ingredients exists as hydrates (wherein water is incorporated stoichiometrically in the crystal lattice), the impact of processing conditions and formulation composition on the dehydration behavior of hydrates during continuous manufacturing has not been investigated. Using powder X-ray diffractometry, we monitored the dehydration kinetics of carbamazepine dihydrate in formulations containing dibasic calcium phosphate, anhydrous (DCPA), mannitol, or microcrystalline cellulose. The combined effect of nitrogen flow and vigorous mixing during the continuous mixing stage of tablet manufacture facilitated API dehydration. Dehydration was rapid and most pronounced in the presence of DCPA. The dehydration product, amorphous anhydrous carbamazepine, sorbed a significant fraction of the water released by dehydration. Thus, the dehydration process resulted in a redistribution of water in the powder blend. The unintended formation of an amorphous dehydrated phase, which tends to be much more reactive than its crystalline counterparts, is of concern and warrants further investigation.

Hydrogen Peroxide/Phosphoric Acid Modification of Hydrochars for Sulfamethoxazole and Carbamazepine Adsorption: The Role of Oxygen-Containing Functional Groups.

Emerging pollutants, such as sulfonamide antibiotics and pharmaceuticals, have been widely detected in water and soils, posing serious environmental and human health concerns. Thus, it is urgent and necessary to develop a technology for removing them. In this work, a hydrothermal carbonization method was used to prepare the hydrochars (HCs) by pine sawdust with different temperatures. To improve the physicochemical properties of HCs, phosphoric acid (H3PO4) and hydrogen peroxide (H2O2) were used to modify these HCs, and they were referred to as PHCs and HHCs, respectively. The adsorption of sulfamethoxazole (SMX) and carbamazepine (CBZ) by pristine and modified HCs was investigated systematically. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicated that the H2O2/H3PO4 modification led to the formation of a disordered carbon structure and abundant pores. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy results suggested that carboxyl (-COOH) and hydroxyl (-OH) functional groups of HCs increased after modification, which is the main reason for the higher sorption of SMX and CBZ on H3PO4/H2O2-modified HCs when compared with pristine HCs. In addition, the positive correlation between -COOH/C=O and logKd of these two chemicals also suggested that oxygen-containing functional groups played a crucial role in the sorption of SMX and CBZ. The strong hydrophobic interaction and π-π interaction between CBZ and pristine/modified HCs resulted in its higher adsorption when compared with SMX. The results of this study provide a novel perspective on the investigation of adsorption mechanisms and environmental behaviors for organic contaminants by pristine and modified HCs.

A new view on the mechanism of UV photodegradation of the tricyclic antidepressant carbamazepine in aqueous solutions.

Mechanism of direct UV photolysis of the tricyclic antidepressant carbamazepine (CBZ) at neutral pH was revealed by a combination of nanosecond laser flash photolysis, steady-state photolysis combined with high resolution LC-MS and DFT quantum-chemical calculations. The detection of short-lived intermediates and the detailed identification of final products were performed for the first time. The quantum yield of CBZ photodegradation (282 nm) is about 0.1% and 0.18% in air-equilibrated and argon-saturated solutions. The primary stage is photoionization with the formation of CBZ cation radical followed by a rapid nucleophilic attack by a solvent molecule. The primary photoproducts are 10-oxo-9-hydro-carbamazepine, 9-formylacridine-10(9H)-carboxamide (a result of ring contraction) and various isomers of hydroxylated CBZ. Prolonged irradiation results to accumulation of acridine derivatives, which should lead to an increase of the toxicity of photolyzed CBZ solutions. The obtained results may be important for understanding the fate of tricyclic antidepressants in processes of UVC disinfection and in natural waters under action of sunlight.

MD Investigation on the Interaction between Carbamazepine and Two CYP Isoforms, CYP3A4 and CYP3A5.

Carbamazepine (CBZ), a commonly prescribed antiepileptic drug, in human liver, is mainly metabolized by two isoforms of cytochrome P450 (CYP), CYP3A4 and CYP3A5. Therefore, the binding of CBZ with these two enzymes plays crucial role in the biotransformation of the drug into its active metabolite. In the present work, classical molecular dynamics (MD) simulation was used to investigate the detailed interaction mechanism between CBZ and these two CYP isoforms at the atomic level. The results revealed that although CBZ can bind with the two proteins, all kinds of the interactions, including hydrogen bonds, salt bridges, hydrophobic interaction, and π-π interaction, are isoform specific. The specificity directly leads to a binding environment difference at the active sites of the two isoforms, as represented by the electrostatic surface potential maps, which further results in the varied dynamic behavior of CBZ in the two isoforms. Our research will help to deepen the understanding of the physiological functions of CYP isoforms and opens the door for the rational design and development of isoform-specific inhibitors.

Photocatalysis of carbamazepine via activating bisulfite by ultraviolet: Performance, transformation mechanism, and residual toxicity assessment of intermediates products.

Carbamazepine (CBZ) as an extensively distributed emerging pollutant has menaced ecological security. The degradation performance of CBZ by UV driven bisulfite process was investigated in this work. The kinetics results indicated that CBZ was high-efficiently degraded by UV/bisulfite following a pseudo first-order kinetic model (Kobs = 0.0925 min-1). SO4•- and •OH were verified as the reactive oxidants by EPR test and the radicals scavenging experiment using MeOH and TBA. SO4•- played a dominant role for CBZ degradation. The Density functional theory (DFT) and LC-qTOF-MS/MS clarified that hydroxylation, ketonation, ring opening reaction, and ring contraction were main transformation patterns of CBZ. As to influence factors, CBZ degradation was significantly hindered in presence of CO32-, HPO42- and NOM. Toxicological analysis derived from metabonomics suggested that the remarkable alteration of metabolic profile was triggered by exposure to intermediates mixture. CBZ intermediates interfered in several key metabolic pathways, including pentose phosphate, amino acids, lysine degradation, glycerophospholipid, glutathione, nucleotides and carbohydrate, which was alleviated after UV/bisulfite treatment. This work provided a meaningful support to potential risk of CBZ intermediates products, which shed light on the future application in eliminating drugs using UV /bisulfite.

In Silico Optimization of Frizzled-8 Receptor Inhibition Activity of Carbamazepine: Designing New Anti-Cancer Agent.

BACKGROUND: Frizzled-8 (FZD8) receptor is a therapeutic target for cancer treatment and recent research has shown that carbamazepine (CBZ) can inhibit this receptor. OBJECTIVE: In this work, it has been tried to optimize CBZ to enhance its binding capacity to the N6W binding site of FZD8 by using structure-based drug design methods. METHODS: CBZ and its 83 derivatives were docked to the N6W binding site of FZD8. RESULTS: Docking results show that two compounds 79 and 82 have the smallest binding energies and are fitted to the N6W binding site. Compounds C79 and C82 have been synthesized by replacing a hydrogen atom of the seven-membered ring in CBZ with benzoate and nicotinate groups, respectively. In addition, docking results show that a trifluoromethyl on one of the phenyl rings is favorable for improving the FZD8 inhibition activity of the molecule. CONCLUSION: Both molecules C79 and C82 were subjected to molecular dynamics (MD) simulation. MD results show that FZD8-C82 complex is stable and this compound binds to the N6W binding site more strongly than compounds C79 and CBZ.

Dissolution Profiles of Carbamazepine Cocrystals with Cis-Trans Isomeric Coformers.

PURPOSE: The purpose of the present study was to investigate the dissolution profiles of cocrystals with cis-trans isomeric coformers. Previously, the carbamazepine (CBZ) cocrystals with even-carbon dicarboxylic acids showed higher supersaturation than those with odd-carbon ones, attributed to particle surface solution-mediated phase transformation (PS-SMPT) to CBZ dihydrate (CBZ DH). However, it has been unknown whether this odd-even pattern holds for cis-trans isomeric coformers. METHOD: CBZ cocrystals with maleic acid (MLE) and fumaric acid (FUM) (CBZ-FUM anhydrate (CBZ-FUM AH) and monohydrate (CBZ-FUM H2O)) were employed as model cocrystals. Hydroxypropyl　methylcellulose (HPMC), polyvinylpyrrolidone, and polyethylene glycol 6000 (PEG) were used as precipitation inhibitors. Dissolution tests were performed under a non-sink condition. Residual particles were analyzed by powder X-ray diffraction, differential scanning calorimetry, polarized light microscope, and scanning electron microscope. RESULTS: All cocrystals showed little supersaturation in the absence of a polymer. In 0.1% HPMC, CBZ-FUM AH showed significant supersaturation, whereas CBZ-MLE and CBZ-FUM H2O did not for the first two hours. HPMC reduced the initial dissolution rate of CBZ-MLE and CBZ-FUM H2O while inducing the highest supersaturation among the polymers after 96 h. The particle surface changed from a smooth plane to a striped pattern, but little or no CBZ DH was detected. CONCLUSION: The cocrystals with cis-trans isomeric coformers showed different dissolution profiles. HPMC increased the dissolution rate of CBZ-FUM AH by inhibiting PS-SMPT but reduced the dissolution rate of CBZ-MLE and CBZ-FUM H2O without inducing PS-SMPT. The striped pattern was suggested to be due to surface etching rather than PS-SMPT.

Enhanced Brain Delivery via Intranasal Administration of Carbamazepine Loaded Solid Lipid Nanoparticles: Optimization, Pharmacokinetic Analysis, In-vitro, and In-vivo Drug Release Study.

BACKGROUND: Carbamazepine (Cbz) is the first-line drug for epileptic seizures but exhibits fluctuation at the plasma level and side effects after oral administration.To overcome these problems, Cbz should be targeted directly into the brain. Therefore, the current experimental design was aimed to formulate and optimize the Cbz containing solid lipid nanoparticles (SLNs) for brain delivery via intranasal administration to get rid of oral complications associated with Cbz. METHODS: A full factorial design was performed to evaluate the effect of variables (X1 lipid concentration, X2 surfactant concentration, and X3 sonication time) on the response variables (size of nanoparticles, entrapment efficiency, and drug release). A two-level, three-factor design was employed herewith, and eight formulations were developed. Further, the formation of Cbz containing SLNs was characterized by compatibility, particle size, entrapment efficiency, and drug release with the support of Fourier Transform Infra-Red (FTIR), Zeta sizer, Transmission Electron Microscopy (TEM), Ultra-violet (U.V.), and High-Performance Liquid Chromatography (HPLC). RESULTS: All eight formulations were characterized through particle size, entrapment efficiency, and invitro drug release performance. Out of eight characterized formulations, SN1 showed the most promising results, including particle size of 210 ± 2.14 nm, entrapment efficiency of 42.1 ± 1.09%, and drug release of 61.3 ± 2.02% and considered an optimized batch. Additionally, the optimized batch SN1was further evaluated for an in-vivo study on male Wistar Rats. CONCLUSION: The study revealed that a high amount of drug was reached into the brain through intranasal administration compared to the intravenous route. Therefore, it can minimize the unwanted side effects of the Cbz associated with oral administration. The formulation SN1 possesses an excellent drug targeting efficiency of 3.014. Finally, the current experimental work concluded that there is a direct pathway from the intranasal route to the brain. This delivery system can be beneficial for directly delivering CNS-active drugs into the brain.

Melt Crystallization of Celecoxib-Carbamazepine Cocrystals with the Synchronized Release of Drugs.

PURPOSE: The fixed-dose combination drug products have been increasingly used to treat some complex diseases. A cocrystal containing two therapeutic components, named as a drug-drug cocrystal, is an ideal solid form to formulate as a fixed-dose combination product. The aim of the study is to prepare celecoxib-carbamazepine (CEL-CBZ) cocrystals by melt crystallization to achieve the synchronized release of drugs. METHOD: The crystal structure of the CEL-CBZ cocrystal was determined from the cocrystals harvested from melt by single crystal X-ray diffraction. The binary phase diagram and crystal growth kinetics of the CEL-CBZ cocrystal from melt were studied to optimize the process parameters of hot-melt extrusion for manufacturing large-scale cocrystals. The intrinsic dissolution rate studies were conducted to compare the dissolution profiles of drugs in the cocrystal and their individual forms. RESULT: The CEL-CBZ cocrystal crystallized in the triclinic space group with one CEL and one CBZ molecule in the asymmetric unit. The crystallization of CEL-CBZ cocrystals were observed both in the supercooled liquid and glassy state. The formation of drug-drug cocrystals significantly alter the intrinsic dissolution rates of the parent drugs to favor the synchronized release. CONCLUSION: Melt crystallization is an alternative, efficient and eco-friendly approach for preparing drug-drug cocrystals on a large scale. The synchronized drug release by drug-drug cocrystals can be used to modulate the release profiles of parent drugs in the fixed-dose combination products.

Mechanistic insights into UV photolysis of carbamazepine and caffeine: Active species, reaction sites, and toxicity evolution.

The pseudo-persistence of pharmaceutical and personal care products (PPCPs)in the aqueous environment may pose potential risks to human health and ecosystems. The UV disinfection in wastewater treatment plants is one of the essential processes before PPCPs enter the water environment, so it is crucial to elucidate the photolytic behavior and mechanism of PPCPs under UV radiation. In this work, carbamazepine (CBZ) and caffeine (CAF) were selected as typical pollutants to investigate the effect of water matrixes, humic acid, inorganic ions, and pH on the UV radiation performance. Hydroxyl radical (•OH) and singlet oxygen (1O2) were identified by quenching experiments and electron paramagnetic resonance (EPR) spectra as playing a dominant role in the degradation process. UPLC-TOF/MS was conducted to identify 13 and 14 possible intermediates of CBZ and CAF, respectively. Moreover, combining density functional theory (DFT) calculations (Frontier Molecular Orbital and Fukui index), hydroxylation, oxidation, and ring cleavage were proposed as the main degradation pathways of the contaminants, which occurred first at the C(7C), N(17 N) and O(18O) sites of CBZ and at the C(9C) site of CAF. The bio-acute toxicity experiment and the Ecological Structure-Activity Relationships (ECOSAR) program were performed to analyze and predict the toxicity of the intermediates of CBZ and CAF under UV radiation, respectively. The results showed that the acute toxicity of both solutions increased after UV radiation and followed with the combined toxicity. This work has great scientific value and practical environmental significance for evaluating the UV disinfection process and managing PPCPs in the aqueous environment.

Insightful vibrational imaging study on the hydration mechanism of carbamazepine.

Anhydrous carbamazepine (CBZ) is an anti-convulsant drug commonly used to treat epilepsy and relieve trigeminal neuralgia. The presence of the dihydrate form in commercial CBZ tablets can change the dissolution rate of the active pharmaceutical ingredient (API), thus decreasing its activity. The hydration transformation can occur during wet granulation or storage, within a few weeks, depending on the ambient conditions. This work aims to investigate the effect of relative humidity (RH) in the transition of pure anhydrous CBZ (CBZ III) into the hydrate form by using confocal Raman microscopy with cluster analysis (CA). Firstly, several tablets of pure CBZ III containing different amounts of CBZ DH (50%, 10%, 1%, 0.5%) were prepared and analyzed by Raman imaging with CA. Our results show that CBZ DH crystals can be detected in the CBZ III tablets, at as low a concentration as 0.5%, giving distinct Raman features for the analysed polymorphs. The stability of pure anhydrous (CBZ III) tablets was then monitored by Raman imaging at room temperature (20-22 °C) and different RH (6%, 60% and 89%). The Raman imaging with CA showed that the anhydrous CBZ tablets start to convert into the hydrate form after 48 h, and it completely changes after 120 hours (5 days) at RH 89%. The tablets exposed to RH 6% and 60% did not demonstrate the presence of CBZ DH after 1 week of exposure. The exposure time was extended for 9 months in the former, and no CBZ DH was observed. A comparative study using IR imaging was also performed, demonstrating the viability of these vibrational imaging techniques as valuable tools to monitor the hydration process of active pharmaceutical ingredients.